Help

Welcome to our help page. If you can’t get answers here, please email us via the contact form or call us directly (toll free!) on 1800 342-426.

MICRO

  • The test button turns the unit off: make sure you turn the toggle switch back ON after testing it!
  • Please remember that the MINI is only for indoor use: if you need dust or water protection for outside, please upgrade to an RV-PLUS or a MAX!
  • If the MICRO droops excessively or falls out of the wall socket, please contact an electrician to install a new one. This indicates worn-out socket contacts which create weak or intermittent electrical connections (with all plugs) and can be a safety hazard or damage electrical devices.
  • The breakers (RCBOs) shown on this website, the packaging and the instructions will most likely be different to the one in your Ampfibian adaptor: RCBO safety standards are regularly updated, and manufacturer’s specifications change. All Ampfibian RCBOs conform to the latest ANZ standards and are independently tested and certified.

MAX

  • The test button turns the unit off: make sure you turn the toggle switch back ON after testing it!
  • The lid covering the switch is purposefully difficult to open (so it doesn’t happen accidentally). If you’re struggling to open it, use a 20 cent coin (or a flat bladed screwdriver) and gently apply it like this.
  • You’ll almost always get a bit of condensation inside the housing. This is not a problem unless there’s more than about a table spoon’s worth of water. If you’re worried, then turn off the power supply, open the unit and wipe it dry. Make sure it’s properly closed again. It’s best to store the unit without the lids fully closed.
  • The breakers (RCBOs) shown on this website, the packaging and the instructions will most likely be different to the one in your Ampfibian adaptor: RCBO safety standards are regularly updated, and manufacturer’s specifications change. All Ampfibian RCBOs conform to the latest ANZ standards and are independently tested and certified.

RV-PLUS

  • The test button turns the unit off: make sure you turn the toggle switch back ON after testing it!
  • Please make sure the lid is fully seated and both lid clips are fully engaged when closing the unit or it won’t be fully weatherproof!
  • You’ll almost always get a bit of condensation inside the housing. This is not a problem unless there’s more than about a table spoon’s worth of water. If you’re worried, then turn off the power supply, open the unit and wipe it dry. Make sure it’s properly closed again. It’s best to store the unit without the lid fully closed.
  • The breakers (RCBOs) shown on this website, the packaging and the instructions will most likely be different to the one in your Ampfibian adaptor: RCBO safety standards are regularly updated, and manufacturer’s specifications change. All Ampfibian RCBOs conform to the latest ANZ standards and are independently tested and certified.

MINI

  • The test button turns the unit off: make sure you turn the toggle switch back ON after testing it!
  • Please remember that the MINI is only for indoor use: if you need dust or water protection for outside, please upgrade to an RV-PLUS or a MAX!
  • The breakers (RCBOs) shown on this website, the packaging and the instructions will most likely be different to the one in your Ampfibian adaptor: RCBO safety standards are regularly updated, and manufacturer’s specifications change. All Ampfibian RCBOs conform to the latest ANZ standards and are independently tested and certified.

Surge Protector S1000DX and Replacement Cartridges

  • Lifting the surge cartridge out of the weatherproof housing helps to insert the caravan power lead!
  • Make sure caravan power lead is firmly and fully inserted into the surge protector!
  • Try to push a bit of lead up into the housing before fully closing it!
  • Ensure cartridge sits over posts when re-installing (or you won’t have enough room for the plug)!
  • You’ll almost always get a bit of condensation inside the housing. This is not a problem unless there’s more than about a table spoon’s worth of water. If you’re worried, then turn off the power supply, open the unit and wipe it dry. Make sure it’s properly closed again. It’s best to store the unit without the lid fully closed.</li

X1

  • To get the strongest lead retention, make sure you allow some slack inside the unit for the cleats to tighten against (as per the engravings on the housing and these pictures)!
  • Please remember the X1 is for temporary use ONLY and should be stored OPEN and in a cool, dry place when not in use!
  • You’ll almost always get a bit of condensation inside the housing. This is not a problem unless there’s more than about a table spoon’s worth of water. If you’re worried, then turn off the power supply, open the unit and wipe it dry. Make sure it’s properly closed again.

Our Partners

Buy direct from Ampfibian online or visit one of our nationwide retailers.